26
Erase message 0 (during message playback)
Skip message 3
Turn off/on answerer 4
Review voice menu options 7
TIP: You can bypass the outgoing announcement by pressing any numbered
key on the touch-tone pad while the announcement is playing. Then, you can
enter your security code to access the answering system.
CHANGING THE SECURITY CODE
The default security code for accessing the answering system from
another location is 1 2 3. You must use the handset to change the security
code. With the phone OFF (not in TALK mode), follow these steps:
1. Press the format /answerer button to display
ANSWERER REMOTE
.
2. Press the *exit button.
3. Enter the new 3-digit security code.
4. Press the *exit button again. The unit announces the new code, pauses,
beeps, and then announces the menu options again.
BELT CLIP AND OPTIONAL HEADSET
ATTACHING THE BELT CLIP
1. Insert the sides of the belt clip into the slots
on each side of the handset.
2. Snap the belt clip into place.
CONNECTING AN OPTIONAL HEADSET TO
THE
HANDSET
The handset can be used with an optional
headset for hands free operation.
1. Connect the headset to the headset jack on the side of the handset
The handset receiver and microphone are disabled when the headset
is connected.
Slot for
belt clip
Slot for
belt clip
To Next Page
Loading...
Need help?
General
