19
Time is transmitted automatically by your local phone company as part of Caller ID
service. If you are subscribed to Caller ID service, the current time is set automatically
when you receive your rst CID call. Otherwise, you can set the time manually.
The day of week is not set automatically by Caller ID. The day of week must be set
manually through base.
1. Press the button until SET DAY shows in the display. Monday is the
default setting.
. Use the (9 or :) button to select the current day.
3. Press until SET TIME shows on the display. 12:00 AM is the default
setting.
4. Use the touch-tone pad to enter the rst digit of the hour, then enter the second
digit of the hour, the rst digit of the minute, and the second digit of the minute.
5. Use the (9 or :) button to scroll to AM or PM.
6. Press again to store your selection. You will hear a conrmation tone.
1. Press the button on base or the button on handset until
SET AREA CODE - - -AREA CODE - - - shows in the display. - - - is the default
setting.
. Use the base or cordless handset number pad to enter your three digit area code.
3. Press button on base or the button on handset again to
store your selection. You will hear a conrmation tone.
SET
AREA CODEAREA CODE
To Next Page
Loading...
Need help?
General
