0
1. Press the button until 41TONE 2PULSE shows in the display. 1TONE is
the default.
.
Press the (9 or :) button or the touch-tone pad to scroll to 1TONE or 2PULSE.
3. Press to save. You will hear a conrmation tone.
In order to use the call Transfer feature (applicable ONLY with additional handsets),
you must have the Transfer ON/OFF set to ON through the menu of each handset.
1. Press the button until TRANSFER 4 1OFF shows in the display.
. Use the (6 or 5) button or the touch-tone pad on the
handset to scroll to 2ON.
3. Press again to save. You will hear a conrmation tone.
Registration links the base to a cordless handset. Once a handset is registered it
can use the base’s phone connection. A cordless handset will not operate until it is
registered to the base. During the registration process, keep the handset near the base.
1. Press the button on the base until LINK HANDSET ? shows in the
display. 2 NO is the default setting.
. Press the number key or press the (9 or :) button on the base to scroll
to 1YES.
3. Press on the base to conrm handset is linked to the base. WAITING
HANDSET REGISTRATION shows in the display.
4. Press the button on the handset until LINK BASE? shows in the display.
NO is the default setting.
5. Press
(6 or 5) button on the handset to scroll to YES.
6. Press on the handset again to conrm. You will hear a long
conrmation tone when the handset is successfully linked to the base.
To Next Page
Loading...
Need help?
General
