TOOLS
K0553 Revision D 64 [EN] English
Calibration (Software upgrade)
To access this function you will be required to enter your PIN. This function is used to implement
software upgrades for the ADTS Tap and the ADTS following installation of updated software.
The “Calibration” sub-menu contains the following items:
ADTS Touch software upgrade
• Application.
• Operating system.
ADTS software upgrade
•Main code.
• Boot code.
For a detailed description of the software download and installation procedures see section
Software updates.
Bluetooth
®
Opens a sub-menu containing three items. Functions related to the first two items are only avail-
able when the ADTS Touch is not connected to the mains supply, see also section Bluetooth®:
- List of devices
Opens the “List of devices” window containing a list of available devices. Select the device of
interest and tap the “tick” icon. Information related to that device is displayed in the tools screen.
Tapping the “cross” icon closes the “List of devices” window.
- New scan for devices
This function initiates a scan of the local area for other ADTS‘s and ADTS Touch‘s, which will then
be listed. To select another device:
1) Touch on the device name.
2) Touch the “Tick” icon, the device is selected and the list closes.
3) Touching the “Cross” icon, cancels the action and closes the list.
- Certification status
Shows certification and compliance information for the area in which the ADTS is being used.
System Status
Opens the Status sub-menu. The Status sub-menu contains the following items:
- ADTS Touch
Opens the “ADTS touch status” window containing the following items:
- ADTS Touch: shows the model number and serial number of the ADTS Touch in use.
To Next Page
Loading...
Need help?
General
