GE AKTAprime plus User Manual

3 Installation
ÄKTAprime plus is delivered in protective packing material and shall be unpacked with
great care.
Any equipment connected to ÄKTAprime plus must fulfill applicable standards and local
regulations.
A video describing the installation process, is supplied with each ÄKTAprime plus system.
For detailed information on Installation, see ÄKTAprime plus User Manual.
3.1 Site requirements
RequirementParameter
100-240 V, 50-60 HzElectrical power
4°C to 40°CAmbient temperature
Stable laboratory bench e.g. 120 × 80 cmPlacement
20% to 95%, non-condensingHumidity
3.2 Transport
The equipment can be transported on a trolley capable of supporting at least 20 kg.
NOTICE
Lift the instrument in the upright position. Do not use the fraction-
ation arm as a lifting handle.
Before moving the system:
•
disconnect all cables and tubing connected to peripheral components and liquid
containers.
•
remove any loose items from the top of the instrument.
•
grasp the instrument firmly by placing the fingers under the base of the main unit
and lift.
For more information on transport, see ÄKTAprime plus User Manual.
ÄKTAprime plus Operating Instructions 28-9597-89 AB 31
3 Installation

GE AKTAprime plus Specifications

General

Brand	GE
Model	AKTAprime plus
Category	Laboratory Equipment
Language	English