GE AMX-II User Manual

GENERAL ELECTRIC MEDICAL SYSTEMS AMX-II X-RAY UNIT
7-1576 SM A0654E
SEC. 17 MOTOR DRIVE SYSTEM
initial Conditions:
@ Main power circuit breaker - ON
© X-ray generator keyed switch - OFF SPEED DRIVE
e = Charger cord disconnected. CONTROL BRAKE ASSIST LATCH
KNOB HANDLE BUTTON BAR
17-1 Motor Drive Controls and Safety Interlocks
1. Check Speed Control Knob. The Drive Motor
Speed Control Knob should rotate freely and
spring return.
2. Place Direction Selector in FORWARD position.
Depress Brake Handle and advance Speed Con-
trol Knob. The slow speed should begin with
some pre-travel of the speed lever.
3. Check Brake Handle. The brake handle limit
switch should be actuated when the Brake
Handle is depressed within 3/8” (9.53 mm) of
its bottom, brake released, position.
4. Check front safety bumper. The bumper should
depress completely without binding and spring
return. The drive power should be de-energized
when the bumper is depressed approximately 1/4
inch. (6.35 mm).
5. Plug the changer cord into a convenience outlet.
Check that the motor drive system is disabled
when the charger cord is plugged into a conven-
ience outlet. 23573-P10
DIRECTION CHARGER SAFETY
6. Turn circuit breaker - OFF. SELECTOR CORD BUMPER
ILLUSTRATION 4-11-51
4-11-41

GE AMX-II Specifications

General

Brand	GE
Model	AMX-II
Category	Medical Equipment
Language	English