GE JVM3160DFCC User Manual

10
DETERMINING MOUNTING PLATE LOCATION UNDER YOUR CABINET
C
Your cabinets may have decorative trim that interferes
with the microwave oven installation. You may need to
remove the decorative trim to install the microwave oven
properly and to make it level.
THE MICROWAVE OVEN MUST BE LEVEL.
Use a level to make sure the cabinet bottom is level.
If the cabinets have a front overhang, install the
mounting plate down the same distance as the front
overhang depth. This will keep the microwave oven level.
Measure the inside depth of the front overhang.
Draw a horizontal line on the back wall an equal
distance below the cabinet bottom as the inside depth
of the front overhang.
For this type of installation with front overhang,
align the mounting tabs with this horizontal line, not
touching the cabinet bottom as described in Step D.
Plate Position – flat bottom cabinet
3ODWH3RVLWLRQ²FDELQHWZLWKIURQWRYHUKDQJ
Mounting Plate Tabs
Touching the Cabinet
Bottom
Mounting Plate
with Tabs Below
Cabinet Bottom
the Same Distance
as the Front
Overhang Depth
At least 30s, up to 36s
Plate Position – recessed cabinet bottom
Mounting Plate
Tabs Touching the
Back Frame of the
Cabinet
30s to Cooktop
30s to Cooktop
1
2
3
Installation Instructions

GE JVM3160DFCC Specifications

General

Style	over-the-range
Color	bisque
Total Capacity	1.6 cu. ft.
Cooking Programs	microwave
Control Options	popcorn; beverage; potato; vegetable; reheat; defrost; weight/time
Convection	no
Power Levels	10; yes
Fan Speeds	2-speed
Venting Type	convertible; externally vented
Sensor Cooking	no
Quick Start	yes; 1-6 minutes
Control Type	electronic touch
Timer	yes
Interior Light	incandescent - 2 bulbs; programmable night light; bright/night/off; incandescent; yes
Microwave Power	1, 000 watts
Electrical Requirements	120/60
Voltage	120 volts
Current	15

Weight and Dimensions

Depth	15 1/4 inch
Height	16 1/2 inch
Width	29 7/8 inch
Net Weight	63 lbs.