Chapter 3: Configuration and commissioning
Kilsen KFP-CF Series Installation Manual 31
Advanced configuration
The default password for advanced configuration is 4444. After entering the
password, the first displayed menu is Advanced default configuration (indicating
level 3 advanced access) or Operating mode. For more information see “Access level
passwords and indications” on page 19.
The advanced configuration menu
Configuration options for this menu are shown in the table below. More information
for each option is included in the related topic.
Note: All configurable options included in “Basic configuration” on page 24 are also
available from the advanced configuration menu.
Table 8: The advanced configuration menu
Display Menu Values Operating mode
Advanced default configuration Configuration presets, as
defined in “Basic default
config
uration” on page 25
All
Sounder operation during a zone
test
ON/OFF All
Sounder re-sound ON/OFF All
Sounder synchronization ON/OFF All
Software version Read only All
Configuration version Read only All
Configuration time stamp Read only All
Configuration date stamp Read only All
Zone configuration Passive EOL
Active EOL
Unlatched
Passive EOL with CleanMe
Active EOL with CleanMe
All
Zone delay ON/OFF All
To Next Page
Loading...
Need help?
General
