GE LOGIQ e R7 Series User Manual

GE
Direction 5370626-100, Revision 18 LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
4-28 Section 4-3 - General Procedure
4-3-16 Backup and Restore Database, Preset Configurations and Images
4-3-16-1 Formatting Media
1.) To format the backup media, DVD-RW, select the UTILITY/CONFIG
button on the Keyboard.
2.) Select CONNECTIVITY
, then REMOVABLE MEDIA. Properly label and Insert the backup
media.
3.) Select the media type from the drop down menu.
4.) Enter the label for the media as shown in Figure 4-15. It is best to use all capital letters with no
spaces or punctuation marks. Press Format
.
5.) The Ultrasound system displays a pop-up menu, as shown in Figure 4-16. When the formatting
has been completed, press OK
to continue.
6.) If desired, verify that the format was successful by returning to Utility/Config
->Connectivity-
>Tools
->Removable Media and selecting VERIFY as shown in Figure 4-15.
Figure 4-15 Format and Verify Media
Figure 4-16 Format Successful Pop-up Menu

GE LOGIQ e R7 Series Specifications

General

Brand	GE
Model	LOGIQ e R7 Series
Category	Medical Equipment
Language	English