GE LOGIQ e R7 Series User Manual

GE
Direction 5370626-100, Revision 18 LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
Chapter 7 Diagnostics/Troubleshooting 7-15
Section 7-7
Network and Insite II Configuration
7-7-1 Network Configuration
7-7-1-1 Wire-LAN Network
1.) Connect system with network.
2.) Press Utility/Config
-> Connectivity -> TCPIP, in IP Settings window check the Enable DHCP box.
In Network Speed box, choose the proper speed available.
Figure 7-9 Enable DHCP

GE LOGIQ e R7 Series Specifications

General

Brand	GE
Model	LOGIQ e R7 Series
Category	Medical Equipment
Language	English