GE
Direction 5370626-100, Revision 18 LOGIQ e/LOGIQ e Vet/LOGIQ i/Vivid e Basic Service Manual
Chapter 3 System Setup 3-21
3-6-5-4 Connect peripherals (cont’d)
C.) Connect DVD-RW to the system.
DVD-RW can be properly connected using USB Port1 or USB Port2 (Figure 3-16 on page 3-21 ).
LITEON DVD-RW drive recommended media list
Media issues are common throughout the DVD-RW drive industry. Because DVD media vendors often
change disc suppliers, quality levels may change due to manufacturing differences. This means that
you may encounter DVD/CD creation problems with media that may have worked successfully before.
Overall system configuration and other factors may also affect the success of creating a DVD/CD.
The following media types have been tested. LITEON highly recommends that you use the media types
on this list when creating your DVDs/CDs.
Not all brands of media have been tested and, therefore, you may encounter success with other brands
not listed. This list will be updated as other media is tested and approved.
Figure 3-16 Connect DVD-RW to the system
DO NOT connect DVD-RW to the system while scanning.
Table 3-13 LITEON DVD-RW drive recommended media list
Brand Name Type
SONY DVD-R
SONY CD-R
SONY DVD-RW
Mitsubishi CD-R
Mitsubishi CD-RW
Mitsubishi DVD-R
Mitsubishi DVD-RW
JVC DVD-R
MBI CD-R
MBI DVD-R
Taiyo Yuden CD-R
Taiyo Yuden DVD-R
To Next Page
Loading...
Need help?
General
