NX-148E LCD Code Pad Installation and Setup Manual
2
© 2004 GE Interlogix
All rights reserved.
NetworX
™
is a trademark of the GE Interlogix companies.
Printed in the United States of America.
These instructions do not purport to cover all details or variations in equipment nor to provide every
possible contingency to be met during installation, operation, and maintenance. If further information is
desired or if particular problems arise that are not covered sufficiently for the purchaser’s purpose, the
matter should be referred to the Market Manager GE Interlogix, Melbourne, Australia.
This document contains proprietary information of GE Interlogix and is furnished to its distributor and their
customers solely to assist that customer in the installation, testing, operations, and/or maintenance of the
equipment described. This document shall not be reproduced in whole or in part nor shall its contents be
disclosed to any third party without prior written approval of GE Interlogix, Australia.
Please refer to the current GE Interlogix product catalogue for detailed warranty information.
GE Interlogix Australia
Office
(03) 9259 4700
Office Fax
(03) 9259 4799
www.caddx.com
www.gesecurity.com.au
Product Distribution
Refer to rear page for
contact details
Safety Symbol Legend
Warning
Indicates a procedure, practice, condition, or statement that, if not strictly observed,
could result in personal injury.
* This symbol indicates electrical warnings and cautions.
Caution
Indicates a procedure, practice, condition, or statement that, if not strictly observed,
could result in damage to or destruction of equipment or property.
** This symbol indicates general warnings and cautions.
Note
Indicates an essential or important procedure, instruction, condition, or statement.
Tip
Indicates a user tip. Provides helpful information that is not normally defined in
regular use, but from an experienced user.
Enter
Indicates a key or button should be pressed to enter data.
To Next Page
Loading...
Need help?
General
