NX-148E LCD Code Pad Installation and Setup Manual
8
Table 6-1 Function Menu
Function Result PG Function Result PG
Adjust code pad tone 13
Reset function
17
Temp Master Mode 18
Log review 11
View zone status 14
Adjust view / brightness of LCD 8
Service menu 21
Programming custom messages 8
View alarm memory 14
Set code pad options 10
Test function 14
Set code pad number and area 11
Display test function 14
Set elapsed time in minutes since
last autotest
13
Light control for X-10 15
Set system time and date 13
House codes for X-10 15
Call back for download 17
Change languages
15
Seize phone line for download 17
Changing user codes
16
Chime
Walk Test 17
Assigning user authority
16
Exit
Silent Exit 17
6b. Adjusting the LCD Contrast & Brightness
Action Result
Prompts to ‘Please Enter Your Code’.
[master code]
Prompts to raise or lower the LCD contrast and
brightness levels.
or
Using the scroll keys to the right of the LCD, you
can raise or lower the contrast of the text.
Advances to the brightness option.
Prompts to brighten or dim the LCD lighting.
or
Use the scroll keys again to adjust to desired
brightness.
Exits this mode.
6c. Custom Messages
Important Notes
1) When using standard NX-148 code pad(s) and NX-148E code pad(s) in the same system, it is
necessary to use a non-‘E’ code pad to program the custom messages. The non-‘E’ code
pads can be identified by the fact that they do not display a menu when
is pressed.
To Next Page
Loading...
Need help?
General
