NX-148E LCD Code Pad Installation and Setup Manual 23
10. DEVICE NUMBERS FOR REPORTING
The following table provides the device numbers that will be reported for trouble conditions.
Table 10-1
Code
Pad
Area
1 2 3 4 5 6 7 8
1 192 193 194 195 196 197 198 199
2 200 201 202 203 204 205 206 207
3 208 209 210 211 212 213 214 215
4 216 217 218 219 220 221 222 223
5 224 225 226 227 228 229 230 231
6 232 233 234 235 236 237 238 239
7 240 241 242 243 244 245 246 247
8 248 249 250 251 252 253 254 255
11. Maximum Wire Run
Maximum total wire run is 800 meters using 14/020 cable. These numbers are for one code pad at the end of the
wire. When connecting more than one code pad to the end of the wire, a higher gauge wire or a reduction in total
wire distance will be required.
To Next Page
Loading...
Need help?
General
