NX-148E LCD Code Pad Installation and Setup Manual
22
Expansion
Power Trouble
The main power to an expansion power supply is not on.
Expansion
Low Battery
An expansion power supply has a low battery.
Expansion
Box Tamper
A box containing an expansion device has been opened.
Expansion
RF Jammed
A radio receiver is being jammed by another RF device.
Expansion
Trouble
An expansion device or code pad is not reporting to the control
panel.
Expansion
Siren trouble
An expansion device has detected some form of trouble on the
bell or siren circuit.
Zone
Tamper, Press
A zone is tampered. Press to identify the tampered zone.
Zone
Low Battery, Press
A wireless device has a low battery. Press to identify the
zone.
Zone
Lost, Press
A wireless or multiplexed zone device is not reporting to the
control. Press to identify the zone.
Zone
Trouble, Press
A zone is experiencing some form of trouble (probably wiring).
Press to identify the zone.
To Next Page
Loading...
Need help?
General
