PROTEUS XR/a
GE MEDICAL SYSTEMS Operator Manual
REV 11 DIRECTION 2259724-100
3-1
CHAPTER 3 SYSTEM DESCRIPTION
The Proteus XR/a X-ray System is a general radiographic system
designed for a wide ra-nge of table, wall stand, wheelchair, and stretcher
examinations. The system is especially suited for general-purpose
radiography in hospitals, clinics, and private practices.
Note: Please confirm the collimator you’ve chosen by referring to the
following contents.
Note: If have, please confirm the wall stand you’ve chosen by referring to
the following contents.
3-1 System Components/Features
The basic Proteus XR/a System consists of:
1 Generator Cabinet
• 32, 50 kW, 50 kHz High Frequency Generator
• 65, 80 kW, 50 kHz High Frequency Generator (optional)
2 System console
• Color LCD Touch Screen
3 OverHead Tube Suspension (OTS)
• Control Console
• Receptor Selection
• kV/mAs Adjustments
• SID Display
• Angle Display
4 Table (optional)
• Elevating Table
• Bucky
• Fixed Grid Cassette Holder (optional)
• Ion Chamber for AEC (optional)
5 Wall Stand (GPCP No.: 2260354) (optional)
• Bucky
• Stationary Grid (optional)
• Ion Chamber for AEC (optional)
6 SG120 Wall Stand (GPCP No.: 2402562) (optional)
• Revolvable Bucky
• Vibrating Grid (optional)
• Ion Chamber for AEC (optional)
7 Proteus XR/a Collimator
• Automatic
• Manual(optional)
8 Eclipse Proteus Collimator
9 X-ray Tube
• VARIAN Rad14 High Speed - 0.6/1.2 mm Focal Spot (32, 50 kW
systems)
• KOUSHAL MX100
High Speed - 0.6/1.25 mm Focal Spot (65, 80
kW systems)
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
Need help?
General
