GE Proteus XR/a User Manual

PROTEUS XR/a
GE MEDICAL SYSTEMS Operator Manual
REV 11 DIRECTION 2259724-100
5-9
5-2 Procedure Edit
Procedure Edit is a computer program with predefined x-ray procedure
parameters. This program is designed with pre-programmed protocols.
Each protocol loaded can be edited or new protocols may be stored.
5-2-1 Accessing Procedure Edit
1. From the main screen of the system console, select the Procedure
Edit button.
2. From any procedure menu screen on the system console, select the
Procedure Edit button.
Note: To make any changes to procedure edit, the procedure edit floppy
disk must be inserted into the disk drive.
5-2-2 Getting Started
The procedure menu, shown in Illustration 5-7, is the Category screen of
procedure edit. This screen was selected from the main screen.
ILLUSTRATION 5-7
PROCEDURE EDIT SCREEN
m
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).

GE Proteus XR/a Specifications

General

Brand	GE
Model	Proteus XR/a
Category	Medical Equipment
Language	English