PROTEUS XR/a
GE MEDICAL SYSTEMS Operator Manual
REV 11 DIRECTION 2259724-100
6-2
6-1-3 Table Top Motion
WHEN THE POWER TO THE TABLE IS CUT, THE TABLE TOP CAN
MOVE FREELY (LONGITUDINAL). TO AVOID INJURIES, MONITOR
THE TABLE TOP MOVEMENT.
PRIOR TO RAISING OR LOWERING THE TABLE TOP, ENSURE
THERE ARE NO OBSTRUCTIONS PRESENT ABOVE OR BELOW.
(
SEE 6-1)
BEFORE THE PATIENT GETS UP ONTO OR DOWN OFF OF THE
TABLE TOP ALWAYS PRESS THE TABLE TOP MOVEMENT LOCK
BUTTON TO BLOCK THE CONTROL PEDAL FUNCTIONS
MOMENTARILY, AND THEREFORE AVOID INJURIES TO THE
PATIENT OR DAMAGE TO THE EQUIPMENT IF A CONTROL PEDAL
IS ACCIDENTALLY STEPPED ON.
6-1-4 HAND GRIPS
ALWAYS USE HAND GRIPS TO AVOID INJURY TO FINGERS AND
HANDS. THE PATIENT’S HANDS MUST BE KEPT AWAY FROM
TABLE TOP EDGES AT ALL TIMES.
WARNING
WARNING
WARNING
WARNING
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
Need help?
General
