Modifications reserved Page 17/25
GE_UPS_OPM_VHU_0K7_3K0_XUS_V011.docx Operating Manual VH700 UL, VH1000 UL, VH1500 UL, VH2000 UL & VH3000 UL
4.4 USE: STATUS AND ALARM INDICATIONS
o status indications the operating mode
! low priority alarms abnormal operating situations
!! high priority alarms situations in which the actual output voltage of the UPS is no longer guaranteed; immediate
action should be taken
Indicators on front panel (fig. 4.1)
Bypass out of limits
(4.4.7)
Shutdown pending
(4.4.11)
No-load shutdown
enabled, load < 5% (4.3.2)
Input Phase-Neutral
reversed (4.4.13)
REPO (Remote
Emergency Power Off)
(4.4.14)
Operating modes and corresponding indications, see 4.3.2 and 4.4.1 – 4.4.14.
- - - - = intermittent
= continuous
0 - 4 = number of LEDs that can be on, depending on runtime capacity / load
25% = LED 25% is blinking
hi = 1 / 2 secs
lo = 1 / 5 secs
mute buzzer: press push button ‘I’ briefly