Generac Power Systems MAGNUM MMG75D User Manual

General Information
33701 C MMG75D-100D Operating Manual 11
POWER ZONE™ GEN CONTROLLER
The Power Zone™ controller is an auto start controller that monitors the unit and indicates operational status and
fault conditions. The controller can be programmed to automatically start or stop, based on time schedule, fault
condition, or load demand.
The controller constantly monitors vital generator and engine functions for a number of preprogrammed alarm and
fault conditions. When a fault condition occurs, the engine can be shut down automatically and the LCD window will
show the fault that caused the shut down; to resume operation, the fault condition must be resolved.
This controller also records a history of unit performance which may be viewed at any time and will not be lost when
the controller is powered down.
Figure 2-5. Power Zone™ Controller Layout
Controller Features and Functions
Home Button
The Home ( ) button is the default screen of the controller and will display after the controller is powered up and
the unit management software is loaded. It displays a live readout of the kW meter, percent of load used (gauge),
selected phase, volts and amps being produced by the generator, and the fuel level with time until empty. The
controller will automatically return to this screen from any other screen after a period of inactivity.
1. Navigation buttons 7. Alarm mute button
2. Control power switch 8. Voltage Adjust button
3. Engine start button 9. Generator button
4. Engine stop/reset button 10. Engine button
5. Liquid Crystal Display (LCD) 11. Home button
6.
Auto/manual mode button
CONTROL ON
CONTROL OFF
I
O
P
o
w
e
r
Z
o
n
e
™
C
o
n
t
r
o
l
l
e
r
STARTING THE GENERATOR
DAS STARTEN DES GENERATORS
COMIENZO DEL GENERADOR
COMMENCEMENT DU GÉNÉRATEUR
1. PRESS CONTROL POWER
SWITCH “ON”
2. PUSH ENGINE START “I”
CONTROL
CONTROL
ON
ON
CONTROL
CONTROL
OFF
OFF
I
O
STOPPING THE GENERATOR
DAS AUFHÖREN DES GENERATORS
PARADA DEL GENERADOR
ARRÊT DU GÉNÉRATEUR
1. PUSH ENGINE STOP “O”
2. PRESS CONTROL POWER
SWITCH “OFF”
CONTROL
CONTROL
ON
ON
CONTROL
CONTROL
OFF
OFF
I
O
11
10
8
9
6
7
5
1
2
3
4
01780

Generac Power Systems MAGNUM MMG75D Specifications

General

Brand	Generac Power Systems
Model	MAGNUM MMG75D
Category	Portable Generator
Language	English