General Information
20 MMG75D-100D Operating Manual 33701 C
To reset the controller and resume operation, press the Enter () button.
BELT TENSIONERS
John Deere engines use two types of belt tensioners: manual and automatic. Adjust the belt using the manual
tensioner according to the manufacturer’s specifications. The automatic tensioner cannot be adjusted or repaired
and is designed to maintain proper tension over the belt’s life. Units with the automatic belt tensioner must be inspected
according to the manufacturer’s specifications.
FRONT HOOD OPERATION
Figure 10 - Front Hood Operation
WARNING
Stay clear of hood and lift structure when opening and closing generator hoods.
Personal injury could result.
To Open the Front Hood
1. With your right hand, grip the handle located on the front panel.
2. With your left hand, pull the hood latch located on the upper corner of the hood. See Figure A. Tilt the hood
open until it contacts the bulkhead panel.
CAUTION
Generator hoods are heavy. Use caution when opening or closing.
Figure A
01891
To Next Page
Loading...
Need help?
General
