Maintenance and inspection procedures
Periodic replacements
4
Lucea 50_100
01740 EN 01
15 / 44
Items Frequency
Spring arm safety snap ring Every six years
Batteries Every three years
4.2.2 Replacing the batteries
WARNING!
Risk of electric shock
The product on which the technician is to work may still be connected to a
power source.
Before performing any maintenance, turn off the device and lock out the elec-
trical supply.
CAUTION!
Risk of equipment damage
If the cables are inverted during installation or maintenance, a short-circuit
may occur when the power is turned on.
Check the polarity of all electrical connections before turning on the power.
WARNING!
Risk of burns
If unsuitable batteries are used, they may explode due to the emission of
gases or liquids.
Always use batteries supplied by Getinge during installation and when repla-
cing defective batteries.
WARNING!
Risk of electric shock or injury
The use of screws or spare parts other than those supplied by the manufac-
turer may damage the device.
Use only screws and spare parts supplied by the manufacturer.
WARNING!
Risk of burns
A metal object falling onto the two poles of the battery simultaneously risks
short-circuiting the battery.
Handle the batteries with care to avoid causing a short circuit.