GB 7
Disposal of the window unitE 212 R1 / E 212 R / E 212
3 Disposal of the window unit
The window unit consists of materials that have to be recycled. The indivi-
dual components have to be sorted in accordance with their material type.
à Aluminium (proles)
à Iron (screws, chain, ...)
à Plastic
à Electronic components (motor, controller, transformer, relay, ...)
à Cables
XX
Dispose of the parts in accordance with the statutory regulations.
4 Maintenance
GEZE prescribes regular maintenance (at least once a year). This is to be
carried out by a suitably qualied person. In the process the operation as
well as the condition of the mechanical equipment (imbalance or signs of
wear, damage to fastening parts) and the electrical connections are to be
checked. The system may not be used during repair and setting work.
XX
Before starting maintenance work, interrupt the power supply (mains
and battery) and verify the safe isolation from supply.
XX
Inspect the xations and clamping screws for rm seating.
XX
Clean soiling from the drive during maintenance.
Caution: The window closes automatically!!
Danger of pinching and clamping!
Before installation, read the enclosed safety notes and
follow these during installation and operation of the drive! Warranty
claims require proper mounting, installation and maintenance in ac-
cordance with the manufacturer's specications.
XX
Inform the electrician by handing out this wiring diagram.
XX
The drive must be protected from construction dirt and splash water.
To Next Page
Loading...
Need help?
General
