Gigabyte BRIX Bios Setup Manual

■
■
■
CSM parameters
Launch CSM (Default: Disabled)
Enabled / Disabled UEFI CSM (Compabili-
ty Support Module) to support a legacy PC
boot process.
Opon available: Enabled / Disabled.
The configuraons will be showed below
aer enabled Launch CSM.
Boot opon filter
Allows users to select the OS type to boot.
Opon available: UEFI and legacy / Legacy
only / UEFI only.
Launch PXE OpROM policy
Allows users to enable legacy opon ROM
for the LAN controller.
Opon available: Do not launch / Legacy
only.
■
Launch Storage OpROM policy
Allows users to select the UEFI or legacy
opon ROM for the storage device
controller.
Opon available: Do not launch / UEFI only
/ Legacy only.
Other PCI device ROM priority
Allows users to select the UEFI or Legacy
opon ROM for the PCI device controller.
Opon available: UEFI OpROM / Legacy
OpROM
Network stack
Allows users to enable UEFI opon ROM for
the LAN controller.
Opon available: Disabled / Enabled.
Boot
Allows you to set the device priority during system boot-up. BIOS setup will display an error message if
the drive specified is not bootable.

Gigabyte BRIX Specifications

General

Brand	Gigabyte
Model	BRIX
Category	Desktop
Language	English