Specification
2-1
2. SPECIFICATION
2.1. HARDWARE
•
CPU
−
Support Socket 370 Processor:
500MHz– 1GHz and faster.
−
370 pins 66/100/133MHz socket on board.
Intel Pentium
!!! 100/133MHz FSB, FC-PGA
Intel Celeron
TM
66MHz FSB, PPGA/FC-PGA
VIA Cyrix
III 100/133MHz FSB, PPGA
0
00
0
PCB Ver.3.0 No Support Intel PPGA Processor
• CHIPSET
−
VT82C693A PCI/AGP Controller(PAC)
−
VT82C596B PCI ISA IDE Controller.
•
SPEED
−
66/100/133MHz system speed.
−
66 MHz AGP bus speed. (2X mode 133MHz)
−
33 MHz PCI-Bus speed.
−
8 MHz AT bus speed.
•
DRAM MEMORY
−
3 banks 168 pins DIMM module sockets on board.
−
Use 16 / 32 / 64 / 128 / 256 / 512MB DIMM module
DRAM.(256Mb DRAM technology)
−
Supports EDO 16MB ~ 384 MB,
SDRAM 16MB~1.5GB.
(256Mb DRAM technology)
−
Supports 3.3V EDO / SDRAM.
−
Supports ECC or Non-ECC type DRAM.
• CACHE
MEMORY
−
32 KB L1 cache memory included in CPU.
−
128/256 KB L2 cache memory (included in CPU).
−
Supports DIB speed mode for L2 Cache.
• I/O BUS SLOTS
−
5 33MHz Master / Slave PCI-BUS.
−
2 8MHz 16 bits ISA BUS.
−
1 66MHz / 133MHz AGP bus.
•
IDE PORTS
−
2 Ultra DMA 33/ATA66 Bus Master IDE channels
onboard. (Using IRQ14,15)