Gima multiCare-in User Manual

6
How to obtain a drop of blood
To perform a measurement with multiCare-in System, it is necessary to
withdraw a drop of capillary blood using the following procedure:
• Wash the hands with hot water to increase the blood circulation in
the ngers to make easier the withdrawal of blood.
• Dry well the hands.
• Check that the nger to be pricked is completely dried.
• Prepare the lancing device that is inside the multiCare-in kit
by inserting the sterile lancet.
Read carefully the instruction for use of the lancing device contained
in the meter kit.
Use a new, not damaged lancet for each prick and use the lancing device
only on yourself.
Before the inserting, verify that the lancets and the protection of the
lancets are intact.
Only a lancet protection intact can guarantee sterile lancet.
Store the protection of the lancet in order to use it to seal the lancet after
use.
Manuale MCIN UK_ED2013 APRILE MFAP Definitivo.indd 6 13/06/2013 16:52:38

Gima multiCare-in Specifications

General

Brand	Gima
Model	multiCare-in
Category	Personal Care Products
Language	English