GIRBAU RMG070 User Manual

Modification of the program contents 25
Cod. 598144
Rev. 11/0717
6.5. Modifying a program
Access the ADVANCED MODE (Section 5.1). The display shows Pro.
Press key 1 to access the PROGRAMMING menu.
The display shows Pr-1. Program 1 is ready for modification. The 2 / 4 keys allow the selection of another
menu. Press key 1 to access the modification of the displayed program.
The display shows Pr-1. Phase 1 is ready for modification. The 2 / 4 keys allow the selection of another phase.
Press key 1 to start the modification to the values of the selected phase.
When the number of the phase is displayed (at the start of phase), the STOP key is used to finalise the program
modification.
Once a program modification has been finalised, the display will show the Pr-* (modified program). Pressing the
STOP key once allows the user to access the higher level of the menu. Pressing twice consecutively allows the
user to exit the ADVANCED USE MODE.
Activation of the phase
Allows the user to program the execution of the selected phase.
Once the desired phase to be modified has been selected, press the 1 key. The display shows Ph-*.
OPTIONS
MEANING
Ph-Y
The phase to be executed is available
Ph-N
The phase to be executed is unavailable
Phases 2, 3 and 6 are phases of obligatory execution.
The 2 / 4 keys allow the modification of the option displayed.
The 1 key validates the selection on the display and allows the user to access the following programmable
function.
Bath level
Bath level allows the selection of the bath level inside the washer.
OPTIONS
MEANING
L-0
Phase without water inlet. Programmable only in phase 1.
L-1
Low level
L-2
Medium level
L-3
High level
L-4
Extra high level
For safety reasons, options L-3 and L-4 are not programmable in machines with a pump drain or a valve closed
without current.
The 2 / 4 keys allow the modification of the option displayed.
The 1 key validates the selection on the display and allows the user to access the following programmable
function.
Temperature of the washing phase
Allows modifying the water temperature in the washing phase. In other phases, it is not possible to program the
water temperature.
OPTIONS
MEANING
C-0 ... C-80
Programmable range in degrees Celsius
F 32 ... F 176
Programmable range in degrees Fahrenheit
The 2 / 4 keys allow the modification of the option displayed.
The 1 key validates the selection on the display and allows the user to access the following programmable
function.

GIRBAU RMG070 Specifications

General

Brand	GIRBAU
Model	RMG070
Category	Washer
Language	English