GIRBAU RMG070 User Manual

Troubleshooting 42
Cod. 598144
Rev. 11/0717
13.3. Disassembling the door of the washing machine
Fig. 13.2
Fig. 13.3
Fig. 13.4
CAUTION
Only to be performed by the Authorised Technical Service
except in emergency situations. Procedure recommended in
problems caused by a failure in the realising of the door of
the machine.
Specific information for RMS610, RMS/RMG613, RMS/RMG617,
RMS/RMG623, RMS/RMG628, HS-6008, HS-6013, HS-6017, HS-
6023, HS-6024, HS-6032, REM025, REM/RMG033,
REM/RMG040, REM/RMG055, REM/RMG070, EH020, EH030,
EH040, EH060, EH080.
Before disassembling the door of the washing machine:
 Check that the bath level does not exceed the door opening
level.
 Close and mechanically lock the manual water supply valves.
 Close and mechanically lock the manual steam inlet valve
(steam heated washing machines).
 Disconnect and mechanically lock the External Automatic
Switch or the of the washing machine disconnector switch.
Door disassembly.
 Remove the protective caps of the hinge locking screws (Fig.
13.2). In models RMS/RMG628, REM/RMG070, HS-6024,
HS6032, EH060 and EH080, first remove the plastic guard
(Fig.13.3/A).
 Disassemble the hinge locking screws. (Fig. 13.4).

GIRBAU RMG070 Specifications

General

Brand	GIRBAU
Model	RMG070
Category	Washer
Language	English