GIRBAU RMG070 User Manual

Demo and Info menu 29
Cod. 598144
Rev. 11/0717
7. OPERATION MODE WITH PROGRAM ACCELERATOR. dEmo Menu
It allows executing one of the four COIN programs with the possibility of reducing the program time.
Program to facilitate maintenance interventions and preparation of programs.
Execution of a program in dEmo mode
Access to the ADVANCED MODE. Section 5.1. The display shows Pro.
Press the 2 key twice. The displays shows CASH and dEmo successively. (In machines with extra options,
press Key 2 three times. The displays shows CASH, EoPt, dEmo successively.
Press the 1 key to access the dEmo menu. The display shows door.
Close the door. The display shows Pr-1.
Ready to execute program 1. Keys 2 and 4 allow the selection of another menu.
Press STOP key to start the program on the display.
The program will be executed following the present contents of it.
During the execution of the program, it is possible to modify it:
Press the 3 key. The information on the display starts flashing.
Press 4 to advance to the following function or to reduce the rotation and spin times.
Key 2 allows increasing the rotation times.
Once the program is finished, open the door.
The washer can be normally used.
8. INFORMATION MENU. InFO menu
Information menu of different parameters.
PARAMETERS
MEANING
COIN
Coin-op washers control
EP**
Program version
Pr-
Total number of cycles run
Pr-1
Number of cycles executed with program 1
Pr-2
Number of cycles executed with program 2
Pr-3
Number of cycles executed with program 3
Pr-4
Number of cycles executed with program 4
EUA
Number of cycles run with extra washing option
Eri
Number of cycles run with extra rinsing option
EdS
Number of cycles run with extra spinning option
SUD
Number of times the anti-suds function has been activated
Access to the ADVANCED MODE. Section 5.1. The display shows Pro.
Press key 2 three times. In the display reports CASH, dEmo, InFO are showed successively. (In machines with
extra options, press Key 2 four times. The displays shows CASH, EoPt, dEmo and InFO successively.)
Press the 1 key to sequentially access the listing of the different parameters and the values of the
corresponding counters.
Once the last option is listed, press the 1 key. The display shows InFO.
The keys 2 and 4 allow the access to other menus.
To exit the ADVANCED MODE press the STOP key.

GIRBAU RMG070 Specifications

General

Brand	GIRBAU
Model	RMG070
Category	Washer
Language	English