Go Power MPPT-PRO Series User Manual

[page 10] | gpelectric.com
INTRODUCTION
1.6 CHARGING STAGES
Maximum power point tracking is used to charge the batteries with the highest current possible, but this is only part of the
equation. A battery cannot be charged at maximum power all the time for safety reasons, so multiple stages are used.
These stages include bulk, boost, oat and, for some types of batteries, equalization as shown in Figure 1-6.
FIGURE 1-5 Multiple peaks resulting from partial shading
(B)
FIGURE 1-6 Battery charging stages curve graph

Go Power MPPT-PRO Series Specifications

General

Brand	Go Power
Model	MPPT-PRO Series
Category	Controller
Language	English