25
Description of the vocal synthesis (audible signals on the door panel) :EL632 G2+ SE / EL642 G2+
Audible signals on the door panel for people with impaired vision.
If vocal synthesis is enabled on the sound module for configuration(see page ),27
the following voice messages can be heard on the door panel:
- While calling: “Call is in progress”.
- End of communication: “Communication is finished”.
- While calling and the monitor is in "Do not disturb" mode: “Call is in progress”.
- Calling at one door panel while another door panel is communicating (if there is more than one door panel):
“System is busy, try later”.
- While calling (apartment with no monitor or : “Call is in progress Resident navailable”.audio terminal) - u
- During door release: “Door Opened”.
Description of the visual signals on the door panel (EL632 G2+ SE / EL642 G2+ module):
- During door release: LED will illuminate during door release.
- No visual indication.While calling (apartment with no monitor ):or audio terminal
Visual signals on the door panel for people with impaired hearing:
- End of communication: LED will turn off.
- During communication: LED will illuminate during the communication process.
- Calling at one door panel while another door panel is communicating (if there is more than one door panel):
LED ' ' will illuminate for seconds.3
- While calling and the monitor is in “Do not disturb” mode: LED will illuminate during in call process.
- While calling: LED will illuminate during in call process.
Tones mode description ( )audible signals on the door panel EL632 G2+ SE / EL642 G2+:
Tones mode audible signals on the door panel.
- End of communication: audible signals.No
- While calling (apartment with no monitor or ):audio terminal 2 5 ton slong tones and short e .
- During door release: .1 long tone
If tones mode is enabled on the sound module (see page for configuration),27
the following tones can be heard on the door panel:
-
5 ton sshort e .
Calling at one door panel while another door panel is communicating (if there is more than one door panel):
- While calling and the monitor is in "Do not disturb" mode: long tones.2
- While calling: 2 long tones.
Description of the P1 and P2 external buttons (EL632 G2+ SE / EL642 G2+ sound module):
The connector is located on the right side of the back module.sound
Insert the connection cable supplied with module to connect the external call buttons P1 and
P2 of the sound module.
P1
P2
COM
P1
P1
P2
COM
P2
External button P1 External button P2
INSTALLATION OF THE DOOR PANEL
NEXA MODULAR G2+ AUDIO AND VIDEO DOOR ENTRY SYSTEM - BUILDING