golmar Nexa Modular G2+ User Manual

CHARACTERISTICS
- Up to 32 monitors/ART1 audio terminals and apartments in mixed installations (terminals and monitors).
- 8 monitors n paral el (Up to i l in
1 output (to monitor) of the distributor) ., see pages 48 and 56-57
- Audible signals on the door panel for people with impaired vision (indicating call in progress, ,
door open call finished).
resident unavailable
and
- Up to 3 monitors and apartments with a monitor per installation.2 ART 4 / ART 4 LITE
- Audio and video door entry system with simplified wiring (non-polarised 2-wire bus).
- first distribu (video door panel): 80m 1mmtor .Maximum distance between the power supply the with a cross-section of&
- Up to 3 monitors and apartments with a monitor per installation.2 ART 7 / ART 7 LITE
- Visual signals on the door panel for people with impaired hearing (indicating call process, communication, door open
and channel busy).
- Up to 4 monitors per apartment.
- G2 SEVideo module EL632 + with pan and tilt mechanism to adjust the telecamera position.
-
Call confirmation tone.
- 2 outputs for independently activated lock releases.
- Up to 4 access panel (DPM-G2+ multiplexer required for more than one access panel) per installation.
-
(FA-ART 7W ).power supply unit required for apartment
Up to 3 monitors and apartments with a monitor per installation2 ART 7W/G2+ . Only the master monitor can activate
Wi-Fi transmission
- Up to 128ART1 audio terminals and apartments per installation ("only audio" installation with EL642/G2+ module).
-
Up to monitors in parallel (installation without distributors) per installation.12
- from monitor (up to 10 seconds), see corresponding monitor user manual.Door opening timeable
- Relay 1 output to activate the DC orAC lock releases actuated by relay.and relay 2
- Input for external door opening button (Relay output).1
- Input for external door opening button (Relay output).2
- Maximum distance between power supply and door panel (video door panel): 80m 1mm.with a cross-section of
- power supply and last monitor with distributorsMaximum distance between " ": 190m 1mm.with a cross-section of
- :(video door panel)Maximum distance between first distributor & last distributor 80m 1mm.with a cross-section of
- Maximum distance between distributor & monitor (video door panel): 30m 1mm.with a cross-section of
- power supply and last monitor without distributors see pagesMaximum distance between ( ): 45, 48 & 56-57.
SYSTEM OPERATION
- To make a call, the visitor must press the button of the apartment; an audible sound indicates that the call is being made and
LED will turn on. If vocal synthesis is enabled, a 'Call is in progress' message appears indicating that a call is being made.
At this moment, the apartment's monitors receive the call. If another apartment is called by mistake, press the button for the
correct apartment and the first call will be cancelled.
- , press the
corresponding icon during
the call or communication processes: one press will activate the lock release for seconds and LED will also turn on for
seconds. If vocal synthesis is enabled, a 'Door open' message will be indicated on the door panel.
To open door of the door panel ,or press the corresponding button below of the ART 4 /ART 7 monitor
on the screen or press the corresponding button door 1 or door 2,of the ART 7W monitor
3 3
is
- To establish communication, press off-the-hook icon,
on the screen . Door panel LEDor press the button of the ART1 terminal will turn off and the
led turn on If the door panel has an EL3002H module with icon displayed on the front, the LED of the EL3002H
module will illuminate. Make sure that the hearing aid is 15 - 20 cm away from the door panel to ensure maximum audio quality
during communication with the apartment.
will .
press the button below off-the-hook icon of the ART 4 / ART 7 monitor
of the ART 7W monitor
- Upon receiving the call, the image will appear on the screen of the master monitor (and slave 1, if it exists) without the visitor
knowing and icon displayed on the screen will blink green. To view the image from slave monitors 2 or 3, press on one of
the buttons of the ART 4/ ART 7 monitor or of the ART 7W monitorpress the screen for the image to appear. If the call is not
answered within 45 seconds, LED will turn off and the system will become free.
- Connection will last for 90 seconds or until on-the-hook icon is
pressed on-the-hook icon . When
communication ends, LED will turn off and the system will become free. If vocal synthesis is enabled, a 'Communication is
finished' message will indicate that the call is over.
is pressed the button below of the ART 4/ ART 7 monitor,
on the screen or is pressed the button of the ART1 terminalof the ART 7W monitor
- and configuration , see user manualDetailed operation of the monitor the corresponding monitor .
3
2
2
SAFETY PRECAUTIONS
wTo avoid damage, the power supply unit must be firmly secured in place.
wInstall the power supply unit in a dry and protected place free from the risk of water leaks or sprays.
wAvoid locations that are humid, dusty or near heat sources.
wTo prevent electric shock, do not remove the cover or handle the wiring connected to the terminals.
wEnsure that the air vents are free from obstruction so that air can circulate freely.
- The wiring must run at least 40 cm away from any other wiring.
- Always disconnect the power supply before installing or making modifications to the devices.
- On the power supply unit:
- ..The fitting and handling of these devices must be carried out by authorised personnel
wDo not overtighten the screws on the connector.
2
2
1
2
2
NEXA MODULAR G2+ AUDIO AND VIDEO DOOR ENTRY SYSTEM - BUILDING

golmar Nexa Modular G2+ Specifications

General

Brand	golmar
Model	Nexa Modular G2+
Category	Intercom System
Language	English