JB Academy, JB Nova and SUB Aqua Pro 31394 V7
Detailed operating manual Page 14
www.grantinstruments.com
7.3 Using the SUB Aqua Pro
7.3.1 Bath controls
7.3.2 Setting the control temperature (
)
Setting the control temperature on the SUB Aqua Pro bath uses the same method as the
JB Academy model. Refer to section 7.1.3.
On SUB Aqua Pro models the heater indicator will periodically illuminate to show the
bath is heating.
7.3.3 Enabling the keypad lock
The control panel can be locked by pressing the set and up keys simultaneously for at
least 3 seconds.
The display will show to confirm that the keypad has locked.
The control panel can be unlocked by pressing the set and down keys simultaneously
for at least 3 seconds. The display will show to confirm that the keypad is
operational.
7.3.4 Setting the over temperature protection ()
The over temperature protection can be used to protect samples by setting a maximum
temperature limit the bath is allowed to heat to. If the bath exceeds this temperature, it
will stop heating, display (over temperature alarm) and sound an alarm.
The alarm can be silenced by pressing the set key.
Over temperature key
Preset keys Up, down and
set keys
Alarm indicator
Heater indicator
Drain
To Next Page
Loading...
Need help?
General
