JB Academy, JB Nova and SUB Aqua Pro 31394 V7
Detailed operating manual Page 6
www.grantinstruments.com
To preserve your water bath in peak condition consult the extra guidance
listed below. Failure to do so may affect your warranty. Consult online
resources for additional important information.
For optimum performance prevent tray from touching bath sides.
Before first switching on the bath please remember to fill the bath with water.
Switching the bath on dry can damage the heater and could invalidate the
product warranty.
If the equipment has been transported or stored in cold or humid conditions,
condensation may form inside it. If that could have happened, allow time (at
least 2 hours at room temperature) for the condensation to evaporate before
using the equipment.
When operating the bath in high ambient temperatures (> 30°C) the
temperature of the water used to fill the bath should be no more than 10°C
below the ambient.
To Next Page
Loading...
Need help?
General
