GREE Air-ccoled Closed Control Unit Service Manual
55
Slightly press the button “Manual Debug” to turn on or off the parts of each module.
Slightly touch the button “ON/OFF” on the right side of the running part to switch to the
manual on/off status of the corresponding part. Words on the button indicate the manual on/off
status of the corresponding part.
Under independent auto mode, slightly touch the button “Enter Manual Mode” to enter the
manual operation mode. Then each part of the system will run according to the on/off order set
for each part. This button will then show words of exit manual mode. Meanwhile, on the
interface of “Running Status”, button “Manual/Auto” of the corresponding mode will display
“Manua”l. See “4. Running Status Interface” for more details.
Slightly press the button “Exit Manual Mode” to exit the manual operation. Then unit will
switch to auto mode and the on/off order set for each part will be invalid.
Note: If units work as a whole, manual debugging is not available.
2.7 System Information
（1）System Information
Slightly press the button “System Info” to view “Maintenance Notice”, adjust screen setting,
change password or restart the touch screen.
To Next Page
Loading...
Need help?
General
