GREE Air-ccoled Closed Control Unit Service Manual
81
4.4.4 Unit and equipment names
”Software’s default name: “module (address number)” for unit/main module, “equipment
(address number)” for submodule.
Right click equipment and select “rename” to input name in popup dialog box, click “OK” to
confirm. Same to rename the network view, equipment information and malfunction record.
Note: address number could not be modified or deleted by renaming.
4.5 Parameter control
4.5.1 Parameter setting
The unit could be controlled by this system, click Main Menu->Control->The machine set
control (or use context menu in network view, or click
in tool), the system will popup the
control interface of present selected equipment, as following picture. Well set every parameter
and click “OK” to control.
To Next Page
Loading...
Need help?
General
