Wired Remote Controller XK19
11
3.10 Energy Saving Function Setting
Turn on energy saving function:
1）Energy Saving Setting for Cooling
When the unit runs under the COOL or DRY mode, press Function button to select "SAVE"
function option, with "SAVE" flashing, and then press ▲ or ▼ to adjust the lower limit, after that,
press the Enter/Cancel button to activate this function.
Cancel energy saving function:
If energy saving function has been set, press Function button on the panel to select “SAVE”
function option. When icon flashes, if you press Enter/Cancel button without pressing ▲ or ▼
button, energy saving function will be canceled; if you press Enter/Cancel button after pressing ▲
or ▼ button, energy saving function will be activated.
2）Energy Saving Setting for Heating
When the unit runs under the HEAT mode, press Function button to select "SAVE" function
option, with "SAVE" flashing, and then press ▲ or ▼ to adjust the upper limit, after that, press
Enter/Cancel button to activate this function.
Note:
under energy saving setting mode, press “MODE” button to switch the energy saving setting for
COOL or HEAT mode.
Fig. 13 Energy Saving Function Setting
Turn on the unit with the “SAVE”
function deactivated
Press the “Function” button to select
the “SAVE” function option.
Press ▲ or ▼ to adjust the lower
limit.
Press the “Monde” button to switch
to the “SAVE” setting for heating.
Press the “Enter/Canel” button to
activate the “SAVE” function.
SAVE
SAVE
SAVE
SAVE
Press ▲ or ▼ to adjust the upper
limit.
SAVE
SAVE
To Next Page
Need help?
General
