Growatt AXE 5.0L User Manual

Shenzhen Growatt New Energy CO.,Ltd
4
1 Product Overview
1.1 Intended Use
Each AXE 5.0L consists of 100Ah cells which form 51.2V voltage battery module and sixteen serial
connection (1P16S). A single cluster can connect up to 10 batteries in parallel, and up to 8
clusters in parallel to expand the capacity and power of the energy storage system. The same
type of cell and the same software version of the PACK can be used in parallel. Specifically, the AXE
battery system powers the loads through PCS at nighttime without solar; when solar becomes available
during daytime, solar energy powers the loads as a priority and store residual solar power into the AXE
batter system.
1.2 Appearance
AXE 5.0L consists of battery module (including cell and mechanical parts), battery management
system (BMS) as well as power and communication terminals. Product appearance is shown as below.
1.2.1 Dimension
Figure 1：Battery size diagram
1.2.2 Introduction to the battery operation panel
Figure 2: Introduction to the battery operation panel
Location
Port
Function
1
Fault light
Display battery alarm and fault status
2
SOC light
Display battery SOC status
3
Power button
Turn the battery on and off
4
Positive terminal
Stands for PACK anode output
5
Communication
Communication between battery packs of single

Growatt AXE 5.0L Specifications

General

Brand	Growatt
Model	AXE 5.0L
Category	Camera Accessories
Language	English