GW Instek ASR-2000 Series User Manual

ASR-2000 Series User Manual
128
IPK CLR
The peak current measured during output process can be easily
cleared out via this function. It is applicable for user to restart
measuring the peak current value when necessity emerges.
Steps
1. Press the Menu key. The Menu
setting will appear on the display.
2. Use the scroll wheel to go to item 2, MISC
Configuration and press Enter.
3. Go to the IPK CLR setting using the scroll wheel
and press Enter on the EXEC button. The
measured hold peak current value will be
zeroed immediately.
IPK CLR
EXEC
Exit
4. Press Exit[F4] to exit from the
MISC Configuration settings.
Example
Current peak hold
value clear
Note
Although the hold peak current will be zeroing at once
right after the execution of Ipkh CLR action, the
zeroing value, however, will be soon updated when
new measurement greater than 0 occurs during
output process.

GW Instek ASR-2000 Series Specifications

General

Brand	GW Instek
Model	ASR-2000 Series
Category	Portable Generator
Language	English