Haier L32F6 Owner's Manual

External Equipment Connections
12 LCD television Owner’s Manual
Note
Component, PC, HDMI input sources cannot be R
used for Monitor out.
When connecting with external audio equipments, R
such as amplifiers or speakers, please turn the TV
speakers o.
Power source
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on
AC. Insert the AC cord plug into a standard polarized AC
outlet.
Note
Never connect the AC line cord plug to other than R
the specified voltage. Use the attached power cord
only.
If the polarized AC cord does not fit into a non R
polarized AC outlet, do not attempt to file or cut
the blade. It is the user’s responsibility to have an
electrician replace the obsolete outlet.
If you cause a static discharge when touching the R
unit and the unit fails to function, simply unplug
the unit from the AC outlet and plug it back in. The
unit should return to normal operation. Polarized
AC Cord Plug.
Basic Receiving and
Playing Operations
Switching ON/OFF the TV set
In the manual, the OSD (on screen display) may be
dierent from your TV’s because it is just an example to
help you with the TV operation.
Switching ON/OFF the TV set
First, connect power cord correctly and the power A
indicator will light.
Press
B POWER on the remote control again.
If you want to exchange to standing by status,
C
please press down POWER on the remote control
Disconnect the power supply or unplug the
D
television if it is intended to completely cease the
television performance.
Choose the Menu Language
When you satisfied with your set for the first time,
you must select the language which will be used for
displaying menus and indications.
Press
A MENU and CH+ /CH- to select Function menu.
Press
B OK/VOL+ to enter, Press CH+ /CH- button to
select language.
Select a particular language by pressing C CH+ /CH-
repeatedly, and then press OK to conrm.
When you satisfied with your choice, press
D MENU to
return to normal viewing.
Choose the Input source
If the TV is not in TV mode, press INPUT on the remote
control unit, and signal source menu will be displayed
on the TV screen (as shown in the below figure). Press
CH+ /CH- to select the TV option, and press VOL+or
External Equipment Connections / Basic Receiving and Playing Operations

Haier L32F6 Specifications

General

Brand	Haier
Model	L32F6
Category	LCD TV
Language	English