Aspect Ratio ▲
Select the mode of Aspect Ratio(Full screen/4:3/
Zoom/Cinema/Panorama/Dot By Dot).
Palette: ▲
Press CH+ /CH- to select the Palette option, and then
press OK or VOL+to enter its submenu, and finally
press CH+ /CH-
to select a toner pattern from six
patterns (Cool2/Cool1/Standard/Warm1/Warm2/User)
to your color preference. Normally, the Standard mode
is selected.
If the User mode is selected, press VOL-
/
VOL+ to enter the palette menu, (as shown
in the below figure), and then press VOL-
/
VOL+ to select a benchmark in the range of
2500K~15000K from warm color to cold color,
afterwards press CH+ /CH- to adjust; if a dierent
benchmark is selected for adjustment, the original
adjustment data will be automatically cleared
Reset ▲
Return to factory default settings. Press VOL-
/
VOL+
to select OK or Cancel, Press OK to armance.
Sound Control Functions
How to choose Digital tone mode
Press A MENU to display main menu on the screen,
and then press CH+ /CH- to select the Sound menu,
afterwards press OK/VOL+ to enter the option to be
adjusted.
Press
B CH+ /CH- to move the cursor to the Digital
tone, Press OK/VOL+ to enter and then press CH+ /
CH- to select Standard/Music/Theater/User mode.
Standard ▲
Normal sound with moderate bass and treble setting.
Music ▲
Designed the sound to best suit music programs.
Theater ▲
Enables extra bass and treble to enhance the movie
experience.
User ▲
A spare setting that can be adjusted to personal tastes
You can also press S.MODE button on the remote control
to select Standard / Music / Theater/User mode.
How to customize your own Sound
status
Press A MENU to display main menu on the screen,
and then press CH+ /CH- to select the Sound menu,
afterwards press OK/VOL+ to enter the option to
be adjusted.
Press
B CH+ /CH- to select the option to be adjust. and
then press VOL-
/
VOL+ to adjust it.
To Next Page
Loading...
Need help?
General
