If you want to return to Channel 8, just press B
"RECALL (Flashback)" once.
If you want to return to Channel 18 again, just press
C
"RECALL (Flashback)" once again.
Note
This function is only available in TV mode. R
Picture Control Functions
This means the adjustment of specific contents in the
picture, if already in normal condition, it is not necessary
to make any adjustment.
Due to dierent TV signal inputs, some items may need
to be adjusted. The following makes a description by
only taking TV signal as an example.
How to select the picture mode
Press A MENU to display main menu on the screen,
and then press CH+ /CH- to select the Picture menu,
afterwards press OK/
VOL+
to enter the option to be
adjusted.
Press
B CH+ /CH- to move the Picture mode option
to be adjusted, and then press CH+ /CH- to select
Standard/Soft/User/Vivid.
You can also press P.MODE on the remote control to
select Standard/Vivid/Soft/ User mode.
Standard ▲
The picture brightness and hue are moderate.
Soft ▲
The picture is soft and in light color.
User ▲
The picture eect is set by yourself to your preference.
Vivid ▲
The picture is vivid, bright and dynamic.
How to customize your own picture status
Press A MENU button to display main menu on the screen,
and then press
CH+ /CH- to select the Picture menu,
press OK/VOL+ to enter .
Press
B CH+ /CH- button to select the item
requires adjusting, press VOL-
/
VOL+
button.
Contrast ▲
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
Brightness ▲
This will adjust the light output of the complete
picture, which will mainly aect the darker areas of
the picture.
Color ▲
This will adjust the saturation level of the colors to suit
your personal preference.
Sharpness ▲
This will adjust the sharpness of fine details in the picture.
Tint ▲
Allows you to select the color mix (Tine) of the picture.
Picture Mode ▲
Select the mode of picture(Standard/Vivid/Soft/User).
To Next Page
Loading...
Need help?
General
