After finishing time setting, press C OK or MENU to confirm.
Note
After setting the On/O Time function, if the TV R
is AC o or forcible DC o, the function will be
automatically cleared.
Setting of On Channel
This function is used in combination with the On/O Time
function. When the TV turns on upon reaching the On
time, it automatically enters the preset channel.
Press A MENU on the remote control unit or MENU on
the TV's front panel to display the main menu, and
then press CH+ /CH- to select the Timer menu,
press
OK or
VOL+
to enter,
afterwards press CH+ /CH- to
select the On Channel option.
Press
B VOL-
/
VOL+ to set the On Channel .
Setting of Remind Time and Remind
Channel
The remind time and remind channel functions allow the
TV to automatically enter the preset channel at preset
time. If the TV is AC o or forcible DC o, the preset time
will be cleared.
Press A MENU on the remote control unit or MENU on
the TV's front panel to display the main menu, and
then press CH+ /CH- to select the Timer menu,
press
OK or
VOL+
to enter,
afterwards press CH+ /CH- to
select the Remind Time option.
Press OK to enter the setting screen, and then press B
CH+ /CH- to select ON or OFF, if you select ON, press
VOL-
/
VOL+ to set hour and minute, and then press
CH+ /CH- to adjust time.
After finishing time setting, press
C OK or MENU to
confirm.
Press
D CH+ /CH- to select the Remind Channel
option, and press VOL-
/
VOL+ to set the found
.
Function Menu
Function Menu Set
Press A MENU on the remote control unit or MENU
on the TV’s front panel to display the main menu, and
then press
CH+ /CH-
to select the Function menu and
press OK/
VOL+
to enter.
Press B CH+ /CH- to select the option to be adjusted,
and then press VOL-
/
VOL+ to adjust it.
Language ▲
To Next Page
Loading...
Need help?
General
