Haier LT22R3CW User Manual

About your LCD / LED LCD TV
EN-13 Digital LCD / LED LCD Television Instruction Manual
Press theB SOURCE button to select SCART mode.
Press the
C PLAY button on the external device.
HDMI INPUT
Connect the cable from the HDMI device to the TV A
HDMI socket.
Press the
B SOURCE button to select HDMI mode.
Refer to the HDMI device user guide for how to
C
operate.
MOUNT YOUR TV ONTO THE WALL
You can mount your TV onto the wall by using a wall
bracket (not supplied). Use M4/M6 machine screws (4
pcs) to screw the TV onto the bracket (not supplied).
PREPARATION OF
YOUR REMOTE
CONTROL
BATTERY INSTALLATION
Place the remote control face down, then open the A
cover of the battery compartment.
Install two AAA batteries. (The + and - symbol of the B
battery must match with the marks on the remote).
Close the cover of the battery compartment.C
BATTERY CAUTION
Confirm there is no object between the remote control
and the remote sensor of the TV set.
Sunshine or other strong light will interfere with the
signal sent by the remote control. In this situation turn
the TV set to avoid the direct light source.
Do not put the remote control in direct heat or in a
damp place as you may damage the remote.
Please use two AAA 1.5V batteries. Do not mix battery
types. Install the batteries at the correct polarities. Do
not use rechargeable batteries. If your TV is to be stored
for a period of time, remove the batteries from the
remote control.
03 Getting
Started
Setting up
LOCATION
You will need to place your TV near your plug socket
(so the power cable can comfortably reach) and within
reach of your aerial socket or extension lead.
CONNECTION
About your LCD / LED LCD TV / Getting Started

Haier LT22R3CW Specifications

General

Audio system	Nicam
RMS rated power	5 W
Built-in subwoofer	No
Number of speakers	2
Comb filter	3D
Display diagonal	22 \
Display brightness	350 cd/m²
Display resolution	1366 x 768 pixels
Display technology	LCD
Native aspect ratio	16:9
Viewing angle, vertical	170 °
Contrast ratio (typical)	800:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	160 °
Supported graphics resolutions	1366 x 768
Storage temperature (T-T)	-15 - 45 °C
Operating relative humidity (H-H)	20 - 80 %
Operating temperature (T-T)	5 - 35 °C
Number of OSD languages	24
On Screen Display (OSD) languages	BUL, CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, ITA, NOR, POL, POR, RUM, RUS, SLV, SWE, TUR
RS-232 ports	0
SCART ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	150 - 240 V
Power consumption (standby)	1 W
Power consumption (typical)	60 W
Product color	Black
Tuner type	Analog
Analog signal format system	PAL, SECAM, SECAM B/G, SECAM D/K, SECAM L