Haier LT22R3CW User Manual

Using the features
EN-31 Digital LCD / LED LCD Television Instruction Manual
Press  button to select the content you recorded.
Press the  button to display the program
information.
Press  button to cancel.
Press OK or PLAY/PAUSE button to play the
program recorded and press STOP button to stop it.
Note
Changing the channel will not inuence the O
recording in the same frequency, but will inuence
the time shift. When the recorded program is being
played, you can not delete it.
Press theO INDEX button repeatedly, the program
will be displayed in the order of program name,
channel name, program time, file name and file
length.
USING YOUR DVD
PLAYER
(certain models only)
PLAYING A DVDV
Press theA SOURCE button on the remote control
to enter DVD mode.
Place the DVD in the disc slot with the DVD label
B
facing away from you and the screen. The disc slot
will only take standard-sized DVD.
The DVD will automatically load; most begin with
C
a disc menu.
Use the
D ,, and  buttons to navigate
around the DVD menu to highlight the play
option and then press PLAY/PAUSE.
PAUSING A DVDV
Press A PLAY/PAUSE to pause playback. The sound
will also be muted.
Press
B PLAY/PAUSE to resume normal playback.
STOPPING A DVDV
Press the A  button to stop playback of a DVD. The
TV screen will show the DVD start-up logo.
Some discs will remember the moment at which
B
the DVD was stopped, so press PLAY/PAUSE to
recall the moment and continue playback.
Press the
C  button twice to stop completely and
clear the memory.
USING FAST FORWARD OR REWINDV
To move forward through a disc more quickly, A
press the  button.
To rewind through the disc, press the
 button.
Press the
B  or  button repeatedly to cycle
through the available speeds, which appear in the
top left corner of the screen: 2X, 4X, 8X, 16X, 32X
and normal playback speed.
Press
C PLAY/PAUSE to resume normal playback.
SKIP TO THE NEXT OR PREVIOUS SCENEV
During playback press the  button to skip to the
next scene on the disc, or press
 to skip to the
previous one.
PASSWORDV
Parental control can be activated by setting the
Password Mode to On. The default password is 1234.
If you forget the password, you can always input 1369
to regain control.

Haier LT22R3CW Specifications

General

Audio system	Nicam
RMS rated power	5 W
Built-in subwoofer	No
Number of speakers	2
Comb filter	3D
Display diagonal	22 \
Display brightness	350 cd/m²
Display resolution	1366 x 768 pixels
Display technology	LCD
Native aspect ratio	16:9
Viewing angle, vertical	170 °
Contrast ratio (typical)	800:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	160 °
Supported graphics resolutions	1366 x 768
Storage temperature (T-T)	-15 - 45 °C
Operating relative humidity (H-H)	20 - 80 %
Operating temperature (T-T)	5 - 35 °C
Number of OSD languages	24
On Screen Display (OSD) languages	BUL, CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, ITA, NOR, POL, POR, RUM, RUS, SLV, SWE, TUR
RS-232 ports	0
SCART ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	150 - 240 V
Power consumption (standby)	1 W
Power consumption (typical)	60 W
Product color	Black
Tuner type	Analog
Analog signal format system	PAL, SECAM, SECAM B/G, SECAM D/K, SECAM L