Harman AMX DVX Series User Manual

17
COM
100V 70V
AMP
AUDIO OUTPUTs
The Line Level audio outputs provide balanced or unbalanced, mono or stereo line-level audio output.
Destination devices require either balanced (differential) or unbalanced (single-ended) connections. The
following picture illustrates options for wiring between output connectors and the destinations.
Destination devices require either balanced (differential) or unbalanced (single-ended) connections. The
following picture illustrates options for wiring between output connectors and the destinations.
+ - +-
L R
destination device
DVX
+ - +-
L R
L R
+ - +-
L R
Balanced Wiring Unbalanced Wiring
DANTE INPUTs/OUTPUTs
Two Dante ports on the rear panel are used to connect Dante/AES67 enabled audio devices to the DVX. It
could be 4 x stereo digital audio inputs or 8 x Mono MIC inputs at required sampling rates: 48kHz and 24bit
bit depth, and 4 x stereo digital audio outputs at required sampling rates: 48kHz and 24bit bit depth.
The following picture describes the blink activity for the LAN connector and cable.

Harman AMX DVX Series Specifications

General

Brand	Harman
Model	AMX DVX Series
Category	Projector Accessories
Language	English