19
DXLINK INPUTs
Four DXLink (RJ-45) connectors on DVX-3266-4K and two DXLink (RJ-45) connectors transport digital video,
embedded audio, Ethernet, and bi-directional control, USB and power over twisted pair cable to DXLink
devices, including digitally transcoded analog video signals. Both inputs support HDCP 2.2.
See the Important Twisted Pair Cabling Requirements and Recommendations
section for information about
cable requirements for these ports.
DXLINK/HDMI OUTPUTs
The following sections provide details on the video outputs for the 3266 and 2265 DVX models.
DVX-3266-4K Video Outputs
The DXLINK/HDMI OUTPUTS include 2 different types of connectors:
4 HDMI Output connectors (1-4) each provide digital HDMI audio and video output.
2 DXLink Twisted Pair outputs (3, 4) mirror HDMI outputs 3 and 4. They provide digital video, audio,
Ethernet, bi-directional control, USB, and power over Category Cable to DXLink Receivers.
See the “Important Twisted Pair Cabling Requirements and Recommendations
” section below for
information about cable requirements.
NOTE:
On Video outputs 3 and 4, if you are using both DXLink and HDMI outputs, it is recommended that
they have the same native resolution. In this situation, the EDID from the HDMI display is used to determine
the SmartScale resolution and timing.
DVX-2265-4K Video Outputs
The VIDEO OUTPUTS include 2 different types of connectors:
2 HDMI Output connectors (1-2) each provide digital HDMI audio and video output.
1 DXLink Twisted Pair output (2) mirrors HDMI output 2. It provides digital video, embedded audio,
Ethernet, bi-directional control, USB and power over Category Cable to DXLink Receivers.
See the “Important Twisted Pair Cabling Requirements and Recommendations
” section information
about cable requirements.
To Next Page
Loading...
Need help?
General