Vi1000 USER MANUAL
7.3 7.3: OUTPUTS > BUS MASTER CONTROL
7.3: OUTPUTS > BUS MASTER CONTROL
Master Bay output channel strips
Bus masters levels can be mapped to the eight Master Bay faders and associated channel strip controls by selecting
Master Bay FADER PAGES buttons [A] (Busses 1-8), [B] (Busses 9-16), and [C] (Busses 17-24), unless Input chan-
nels have been assigned to these pages.
Input Bay - Fast-Select using bus meter touch
By touching any of the channel metering areas in the Master Bay touch screen area you assign that bank of eight to
the input bay. Three banks of eight outputs are located on the right of the the Master Bay touch screen.
Bus Parameter Control
With the busses assigned to the Input Bay by touching the meter blocks, the console’s Vistonics screens give direct
touch access to the processing chains of any 8 of the console’s 24 output buss channel strips.
Alternatively, with the Master Bay Vistonics button function set to [SOLO/SEL], pushing any bus master chanel strip
[SOLO/SEL] button will display that bus output’s processing chain in the Master Bay touch screen area.
In both cases, selecting a processing block will bring that block’s parameters up on the VST area of the Vistonics
screen.
To Next Page
Loading...
Need help?
General