Hettich AxisDrive Series User Manual

5
5
1. Introduction
The operating and mounting instructions are to make it easier
for you to get to know the double drive and to use its
intended applications.
The operating and mounting instructions contain important
information for safe and professional mounting of the double
drive. Observing them will help avoid dangers, reduce repair
costs and downtimes, and to increase reliability and service
life.
Present national provisions on accident prevention and
environmental protection are also applicable.
The operating and mounting instructions must be read and
used by every person who is charged with work at the
components,
such as:
 Mounting
 Operation
 including troubleshooting in the
 scope of work, maintenance, disposal
 Maintenance
 Servicing, inspection, repair and
 Transport
1.1 Notes on signs, symbols and marks
The safety notes in the operating and mounting instructions
are structured as follows:
Danger!
This danger note indicates a directly dangerous
situation that will lead to death or severe injury
if the safety measures are not observed.
Danger
Warning
Warning!
This danger note indicates a potentially
dangerous situation that may lead to death or
severe injury if the safety measures are not
observed.
Caution
Caution!
This danger note indicates a potentially
dangerous situation that may lead to minor or
light injury if the safety measures are not
observed.
Note
This note indicates possible property damage or
a process of special interest / importance that
may arise if the safety measures are not
observed.

Hettich AxisDrive Series Specifications

General

Brand	Hettich
Model	AxisDrive Series
Category	DC Drives
Language	English