Hikmicro THUNDER Series User Manual

Thermal Image Scope User Manual
19
4.3 Set Reticle Color
The function can change the color of the reticle in reticle correction display and distance
measurement display.
Before You Start
Enable reticle correction first.
Steps
1. In the view mode, hold to show the menu.
2. Select , and press to switch the color of the reticle. Black, White, Green, and Red are
selectable.
3. Hold to save and exit.
Note
In black hot mode, if you set the reticle color as white, the reticle will display black automatically.
Figure 4-2 White Reticle in Black Hot Mode

Hikmicro THUNDER Series Specifications

General

Brand	Hikmicro
Model	THUNDER Series
Category	Thermal cameras
Language	English